27 DIY Window Plant Shelve Ideas

Looking to add some unique style to your window space? DIY window plant shelves might be just the solution you need. By creating your own plant shelves, you can customize the design to match your home’s style while also saving money. Check out these 30 inspirational ideas to get started.

6. Design Small Hanging Tubes

If you are new to plant growing or want to grow a lot of plants, designing small hanging tubes can be a great idea. This design follows the same principle as a hanging shelf. To create this design, drill a hook at the top of your window frame and pass a large, thicker rope through the hook. Then, thread the rope through the holes of two shelf planks on either side.

Make sure to knot the rope under each hole to hold the planks securely. Each plank should be at least 3 inches wide and 15 inches long, with at least four to five holes drilled on each plank. The holes should be at least 1.75 inches in diameter.

Once you have completed the design, fill up your test tubes with water and the plants you wish to grow. Replace the tubes with new ones when it’s time to transfer the plants to pots. You can also attach smaller succulent pots by following the same design with slightly larger holes than 1.75 inches.

This design is an affordable and space-saving way to grow plants indoors. It is perfect for those who do not have a lot of space but still want to enjoy the benefits of gardening.

7. Use Glass Window Shelves

If you have a smaller or narrow window, using glass window shelves can be a great DIY idea. Glass shelves work well for smaller windows because they do not require full coverage, which can create clutter. However, they may not be the best option for larger windows as they may easily crack under the weight of plants.

If you decide to go for glass shelves, consider investing in stronger glass to handle the weight of your plants. Keep in mind that stronger glass may come at a higher cost. Using glass window shelves can be a stylish and practical solution for displaying your plants, but it’s important to choose the right size and strength for your window.

8. Try Acrylic Window Shelves

If you’re looking for a sturdy alternative to glass shelves for your plants, consider using acrylic window shelves. These shelves can handle more weight and can be customized to fit your load capacity needs. When purchasing your tools, make sure to choose the right acrylic shelf plank width to ensure stability and durability.

26. Build A Window Sill Frame & Shelf

If your window sill doesn’t reach the floor, you can create a shelf frame that runs from the sill to the floor. This design allows you to display multiple plants of different sizes and types. With this shelf, you can add flowering plants on the top, green plants on the lower shelves, and crawling plants for a dramatic garden look in your living room. Building a window sill frame and shelf is a great way to add some greenery to your home decor.

31. Mix It Up

To add variety to your window plant shelf design, consider building a permanent multilayered frame shelf at the bottom of a large or long window. You can then drill hooks at the top of the frame to hang more plants, creating a unique and dynamic display.

20. Incorporate A Ceiling Hanging Shelf

If you’re looking for a way to display your plants without taking up floor space, a ceiling hanging shelf can be a great solution. However, keep in mind that this process requires drilling into your ceiling, so it may be best to call a professional for help with this initial step.

To create a ceiling hanging shelf, start by drilling hooks into your ceiling in a rectangular shape. Make sure the hooks are sturdy enough to support the weight of your shelf and plants. Next, attach chains to each hook, making sure they are all the same length.

Get a thick wooden plank or slab with dimensions similar to that of the rectangular area filled by the four ceiling hooks. Drill hooks into the edges of the plank and attach each hook to the suspended chains. Placing the hooks at the far most edge of the plank helps to keep it stable when suspended.

Now that your hanging shelf is ready, you can place your plants on it. With a ceiling hanging shelf, you can create a beautiful and unique display while keeping your plants out of the way of your direct view.

28. Put Together a Multilayered Shelf

If you have a large window and want to support a variety of plants, consider building a multilayered shelf. This design allows you to accommodate plants of different sizes and is also convenient to move without drilling it into the window. Here are some tips to help you put together a multilayered shelf:

  • Choose the right materials: Use sturdy and durable materials such as wood or metal to ensure your shelf can support the weight of your plants.
  • Measure your window: Measure the width and height of your window to determine the size of your shelf. Make sure to leave enough space between shelves for your plants to grow.
  • Build your shelf: Cut your materials to size and assemble your shelf using screws or nails. Make sure your shelf is level and secure.
  • Add finishing touches: Sand your shelf to remove any rough edges and apply a coat of paint or stain to protect it from moisture.

With these simple steps, you can create a multilayered shelf that will support your plants and add a beautiful touch to your home.

1. Built A Simple Wooden Plank Window Shelf

Transforming your window with a DIY plant shelf is an affordable way to add a touch of greenery to your home. To build a simple wooden plank window shelf, you’ll need two wooden planks, a drill, and smaller tools. You can purchase the planks from a home improvement store and have them pre-cut to the size of your window, eliminating the need for a saw.

Once you have your planks, drill holes into them and attach them to your window frame using screws. After installing the shelf, you can choose to polish, paint, or leave it as is, depending on your preferences. You can also opt for single or multiple shelf layers, depending on the amount of space you have.

This design is versatile and can work in different parts of your home. You can set it up in your room for a refreshing display of green succulents or in the living room for beautiful floral displays. Alternatively, you can use it in your kitchen for edible herbs such as mint, thyme, rosemary, and cilantro.

Overall, building a simple wooden plank window shelf is an easy and affordable way to add a touch of nature to your home.

11. Build A Movable Plant Window Frame

If you’re not keen on making any alterations directly to your window, building a plant window frame is a great alternative. This involves creating a frame with multiple shelves that can fit into your window. You can design the frame however you like, as long as the length and width of the frame do not exceed those of your window.

To build a movable plant window frame, you’ll need to take the dimensions of your window and create a frame that fits snugly inside. You can use any type of wood or design you want, as long as it’s sturdy enough to hold your plants. Once you’ve built the frame, simply fit it into your window and add your plants on the shelves. This allows you to move the frame around as needed and enjoy the benefits of indoor gardening.

29. Try a Metal Plant Tray

Looking for a unique way to display your plants? Consider using a metal plant tray instead of a wooden shelf. You can find one at a thrift store and it will give your farmhouse kitchen a charming touch. Plus, it’s an affordable option that adds a rustic feel to your home decor. Here are some advantages of using a metal plant tray:

  • Durable and long-lasting
  • Easy to clean and maintain
  • Complements any decor style
  • Provides a sturdy base for your plants
  • Can be used indoors or outdoors
  • Adds a vintage touch to your space

In summary, a metal plant tray is a great alternative to a wooden shelf. It’s affordable, durable, and adds a rustic feel to your decor. So next time you’re at a thrift store, keep an eye out for one to use in your home.

27. Maintain Your View With An Over-the-Window Shelf

If you want to maintain your view and still have a decorative window treatment, consider using an over-the-window shelf. This can be achieved by getting a customized wooden or metal mesh shelf that runs the width of your window from a home improvement store. After drilling it into the wall slightly above your window frame, you can place your desired plants on the shelf. This will allow you to enjoy the view while still having a beautiful window display.

How to Build Window Plant Shelves

Building window plant shelves is a simple and fun DIY project that can add a touch of greenery to your home. Here are the basic steps to follow:

  1. Measure the dimensions of your window using a measuring tape. This will help you determine the right size of wooden shelf plank you need.
  2. Mark the space between each intended shelf installation location with a pencil. Leave at least a foot between each shelf.
  3. Use a drill to make holes where you marked with the pencil, starting from the bottom and working your way to the top of the window.
  4. Drill each bracket into the wall and screw them securely.
  5. Place your empty shelf wooden plank on each bracket and add a few books. Leave them on the shelves for at least an hour or two to ensure the shelves can handle the weight.
  6. If the shelves can handle the weight, connect the shelf to the bracket and drill the shelves into the wall.

Here are some DIY window plant shelf ideas you can try at home:

Idea Description
Hanging Window Shelves These shelves are suspended from the ceiling using ropes or chains and can be raised or lowered as needed.
Ladder Plant Shelves This design features a ladder-like structure that leans against the wall and has shelves at different heights.
Box Plant Shelves These shelves are made by attaching wooden boxes to the wall and filling them with plants.
Corner Plant Shelves These shelves fit snugly into the corner of a room and can be made with triangular or rectangular shelves.

With these simple steps and creative ideas, you can easily build your own window plant shelves and enjoy the beauty of nature indoors.

24. Install A Floating Shelf

If you’re looking for a minimalist way to display your accessories and decor, a floating shelf is a great option. First, attach a hook at the ceiling or top of the window frame. Next, thread a rope through the hook and tie it securely to the shelf. Finally, place a circular or rectangular wooden plank shelf on top of the rope. This is a great way to display small plants for a natural and clean look in your home.

3. Hang A Shelf With Hooks & Ropes

If you’re living in a rental home and don’t want to drill holes into the walls, this shelf idea is perfect for you. You’ll only need four hooks to be affixed at the top frame of your window in a rectangular layout. Once you have the hooks in place, you can thread ropes on either end, which will act as the support for your shelves.

To prevent your plants from toppling over, tie a knot underneath each shelf plank to hold them in place. This design is similar to that of a swing, so you can easily move your shelves around. With this design, you’ll have a practical and easy-to-move shelf that won’t damage your rental home’s walls.

Here are some key points to keep in mind:

  • Use four hooks to affix your shelf to the top frame of your window.
  • Thread ropes on either end of the hooks to support your shelves.
  • Tie a knot underneath each shelf plank to prevent your plants from toppling over.
  • You can easily move your shelves around with this design.

25. Add An Under Window Shelf

When considering window shelf ideas, don’t limit yourself to in-window or over-the-window options. An under-window shelf is a great way to display your plants and still allow them to receive ample sunlight. This design involves building a shallow, elongated shelf and placing it at the bottom of your window. The shelf provides enough space to support larger plants without worrying about complicated design details. By placing your plants on this shelf, they remain in good view from the outside, adding a touch of natural beauty to your home.

15. DIY A Small Step Ladder

If you have a deep window sill and potted plants, building a small step ladder is a great idea. The ladder can give each plant enough depth to grow and thrive. Alternatively, you can attach each pot to the steps if you have limited space. You can choose to drill the ladder into the window frame or wall, or leave it immobile and let it support itself. This DIY project is simple and customizable to fit your specific needs.

16. Drill in a Plant Hanger

To hang various plants of different sizes, you can add plant hangers to your window frame interior. Here’s how you can do it:

  1. Get at least two metal or wooden rods.
  2. Screw the rods in parallel to each other on the window frame interior.
  3. Insert shorter rods perpendicular to the two parallel rods.
  4. Hang different plants on both large and small rods.

With this simple method, you can easily hang crawling plants or large pots of different sizes.

5. Add More Plants To Your Hanging Shelf

If you want to add more greenery to your kitchen, consider creating a hanging shelf with multiple rods. This DIY design is both elegant and functional, allowing you to hang several smaller plants or herbs in one space.

To create this design, start by drilling curtain rod holders on either side of your window. You can even install one pair of rod holders slightly above the window frame and another pair in the middle of the window to maximize your space. Then, add a rod for each pair of holders and attach large curtain rings to each rod. The number of rings you use will depend on how many plants you want to add, but it’s recommended to keep it to no more than 4 or 5 plants per rod.

Next, transfer your plants to pots with rope holders, such as macramé pot holders for added style. Insert the ropes into the rings on the rods and adjust the height of each pot to your liking.

This design works particularly well if you only plan on using blinds or simple pop-in shades for your window since the plants take up regular curtain space. By adding more plants to your hanging shelf, you can create a beautiful and functional display that adds life to your kitchen.

17. Design A Plant Bench

Designing a plant bench can be an affordable way to add greenery to your home. By building a small bench to fit the width of your window and placing it on your window sill, you can top it with your favorite plants. The beauty of a bench shelf is that it can support plants of any size, depending on how you design it. Consider using materials such as wood or metal to create a sturdy base, and add shelves or hooks to accommodate different types of plants.

4. Get a Little Creative With Hanging Shelves

If you are looking for a unique way to display your plants, consider hanging shelves using curtain rods and rod holders. This design eliminates the need for traditional hooks, ropes, or shelves. Instead, you can use a curtain rod to support the ropes that hold the shelves.

To create this hanging shelf, you will need to install curtain rod holders and rods on your window. Once the rods are in place, fasten ropes to the rod and thread them through the edge holes on the shelves. Knot the ropes at the bottom of each hole for support.

It is recommended to use metal or wooden rods instead of plastic rods for added strength. You can suspend two to three shelves, but make sure the rod and rod holders are strong enough to support the weight of the plant pots.

This creative approach to hanging shelves is a great way to add some greenery to your space while keeping it organized and visually appealing.

18. Attach Suction Shelves to Your Window

If you’re looking for a temporary solution to display your plants without creating a mess, suction shelves are a great option. These shelves come with suction cups that attach to your window glass or interior frame. You can find them easily at any home improvement store or online. Consider getting multiple shelves to spread across your window and create a beautiful display for your plants. Simply attach the suction cups to the window and place your plants on the shelf. It’s that easy!

19. Build Hanging Panel Shelves

To build hanging panel shelves, start by creating panels on the interior of the wood frame using small wood planks. Begin with two longer planks running parallel to each other along the length of the window. Then, drill smaller planks on top of them, placing them perpendicular to the longer planks. After every 5 to 6 small planks, affix hooks to the panel and use them to secure your plant pots. This will create a beautiful and functional hanging garden in your home.

14. Reuse an Old Drawer

If you have a window with a deep sill, you can repurpose an old drawer as a shelf. To turn it into a planter, line the drawer with a tarp, add soil and fertilizer, and plant your desired greenery. If you want to add a water feature, you can DIY a small pond for a refreshing touch. Alternatively, use the drawer as a regular shelf and display potted plants. If the drawer is worn out, sand it down and apply a fresh coat of paint or polish to give it a new lease on life.

21. DIY a Herb Garden Stand

If you’re looking for a creative way to store your herb pots or directly plant them, consider designing a shelf in the shape of a garden stand or chest. You can easily put together the basket using wooden planks of your choice and place it on your window sill for easy access to your herbs. This is a great option for those who love to cook with fresh herbs and want to have them readily available.

23. Affix An Extended Window Shelf

Adding an extended window shelf is a great way to increase the space in your home for plants of all types and sizes. This design offers stability and can support a variety of shelving materials, including metal, glass, wood, acrylic, or plastic. However, it’s important to note that this design only allows for the addition of blinds before the permanent structure is put in place. With an extended window shelf, you can create a beautiful and functional plant display in your home.

12. Fix Permanent Wooden Frames

To build sturdy shelves for heavy plants, consider constructing permanent wooden frames. This option is best suited for those who own their home and want a long-lasting solution. Ensure that the frames are secured to the wall studs for added stability.

2. Affix a Window Sill Shelf

If you have a concrete window sill, you can save money by affixing a wooden plank to the depth of the sill to create a shelf. This type of shelf allows for any finishing design, whether paint or polish. Since it is not suspended, it can support any size plant, but the depth of your sill will determine how much space you have. Consider using a sturdy bracket or adhesive to secure the shelf in place.

Final Verdict

Adding a DIY window plant shelf to your home is a great way to improve the aesthetic appeal of your interior and exterior. With the various ideas outlined above, you have a lot of options to choose from. You can customize your plant shelf to fit your style and budget. Additionally, adding a shelf to your exterior window sill can further enhance the beauty of your home or apartment. Consider your options and choose the best one that works for you.


You can create your own DIY window plant shelves with just a few materials and some creativity. These shelves provide a great way to display your plants and add some greenery to your home. Some popular ideas include using wooden planks, repurposing old drawers, or using wire mesh. Consider the amount of sunlight your plants need and the weight of the pots when designing your shelves. With these ideas and some basic tools, you can create beautiful and functional window plant shelves.

Leave a Comment