16 DIY Surfboard Racks Ideas & Plans

If you’re a surfer, you know that it’s not just a sport but a way of life. Fortunately, surfing is also an affordable hobby that requires little maintenance. However, one thing you must keep in mind is the proper storage of your surfboard to prevent scratches. In this article, we’ve compiled 19 DIY Surfboard Racks that you can easily make to store your surfboards and protect them from damage. Whether you’re a seasoned surfer or just starting out, we have a project that will suit your needs. So, scroll down and start building your own DIY Surfboard Rack today!

DIY Surfboard Rack

If you’re a surfing enthusiast, this DIY surfboard rack is a must-have accessory. With this gadget, you can store and display your surfboards neatly in any room of your house or garage. You can even hang it up by your front door for easy access. The best part is that it’s easy to make and requires only a length of timber, a drill, a packet of mushroom head nuts and bolts, two lengths of PVC plumbing pipe (3m), three lengths of 1m plumbing insulation tube, and 12 caps.

To build the surfboard rack, start by cutting the timber into three equal lengths. Then, drill holes in each piece of timber to fit the mushroom head nuts and bolts. Next, slide the PVC pipes through the holes and attach the insulation tubes to the pipes using the caps. Finally, attach the rack to the wall using screws and enjoy your newly organized surfboard collection.

With this DIY surfboard rack, you can keep your boards safe and organized while showing them off to your friends and family.

How to Make a PVC Pipe Surfboard Wall Mounted Rack

If you’re looking for an affordable and easy way to store your surfboards, a PVC pipe wall mounted rack might be the perfect solution for you. With just a few materials and tools, you can create a sturdy and functional rack that will keep your surfboards organized and out of the way.

To make a PVC pipe surfboard wall mounted rack, you will need the following materials:

  • PVC pipes (1-inch diameter)
  • PVC elbows (1-inch diameter)
  • PVC tees (1-inch diameter)
  • PVC caps (1-inch diameter)
  • Screws
  • Wall anchors

You will also need the following tools:

  • Saw
  • Drill
  • Screwdriver
  • Measuring tape

To begin, you will need to cut your PVC pipes to the desired length using a saw. The length of your pipes will depend on the size of your surfboards. Next, you will need to assemble the PVC pipes using PVC elbows and tees to create the shape of your rack. Make sure to use PVC cement to secure the connections.

Once you have assembled the PVC frame, you can attach it to the wall using screws and wall anchors. Finally, you can add PVC caps to the ends of the pipes to prevent your surfboards from slipping off the rack.

Overall, making a PVC pipe surfboard wall mounted rack is a simple and cost-effective way to store your surfboards. With just a few materials and tools, you can create a functional and stylish storage solution that will keep your surfboards safe and organized.

PVC Pipe Surfboard Rack

If you are an avid surfer, you probably have multiple surfboards that need to be stored properly. A surfboard rack made from PVC pipes can be a great solution to this problem. To build this rack, you will need PVC pipes, PVC connectors, screws, and glue. Follow the instructions provided in this guide to build your own PVC pipe surfboard rack. This rack is not only functional but also affordable and easy to make. Plus, it will keep your surfboards organized and safe from damage.

How To Build A Low-Budget Surfboard Rack

If you’re looking for an affordable way to store your surfboards, look no further. You can build a simple and sturdy surfboard rack out of wood with just a few basic tools. This rack can hold up to four surfboards and is easy to assemble.

Materials:

Here are the materials you will need to build your surfboard rack:

  • (4x) 2x4x10′ boards
  • (1x) 1″ plywood sheet
  • (8x) 1.5″ wood screws
  • (20x) 3/4″ wood screws
  • (20x) 2.5″ wood screws
  • 24″ of carpet or astro turf
  • (5x) 12″ round rods
  • Permanent marker

Instructions:

Follow these simple steps to build your low-budget surfboard rack:

  1. Cut the 2×4 boards into the following lengths:
    • (4x) 48″
    • (4x) 18″
    • (8x) 12″
    • (4x) 9″
  2. Cut the plywood sheet into two 24×48″ pieces.
  3. Lay out the 48″ boards on a flat surface, parallel to each other and spaced 18″ apart.
  4. Attach the 18″ boards to the 48″ boards using 1.5″ wood screws. These will serve as the base of the rack.
  5. Attach the 12″ boards to the sides of the rack using 2.5″ wood screws.
  6. Lay one of the plywood sheets on top of the 12″ boards and attach it using 3/4″ wood screws.
  7. Repeat steps 5-6 for the other side of the rack.
  8. Cut the round rods into 12″ lengths.
  9. Use a permanent marker to mark where you want the rods to go on the rack.
  10. Drill holes for the rods using a drill bit slightly larger than the diameter of the rods.
  11. Insert the rods into the holes.
  12. Cut the carpet or astro turf into two 24×48″ pieces.
  13. Lay one piece on top of the plywood and attach it using 3/4″ wood screws.
  14. Repeat step 13 for the other side of the rack.

Your low-budget surfboard rack is now complete! It’s sturdy, easy to build, and can hold up to four surfboards.

How To Make A Wall Mounted Surfboard Rack

To make a wall-mounted surfboard rack, you will need to purchase two rack sides and six rack arms. These materials can be ordered from Amazon or a local hardware store. It is recommended that you have extra wood screws on hand in case you need them.

Once you have all of the materials, you will need to use a power drill and electric screwdriver to assemble the rack. Sandpaper can be used to smooth out any rough edges. If you desire, you can also paint or varnish the rack to match your decor.

To install the rack, you will need to find a suitable location on your wall and use a level to ensure that the rack is straight. Then, use the appropriate screws and anchors to securely mount the rack to the wall.

With these simple steps, you can create your own wall-mounted surfboard rack and keep your boards organized and easily accessible.

How To Build A Car Roof Rack For Your Surfboard

Transporting your surfboard to the beach can be a hassle, but building a car roof rack for your surfboard can make it easier. Here’s how to do it:

  1. Gather materials: You’ll need a length of PVC pipe, foam padding, straps, and a drill.
  2. Measure and cut PVC pipe: Cut the PVC pipe to the desired length, ensuring that it’s long enough to hold your surfboard.
  3. Drill holes in the PVC pipe: Drill two holes on each end of the PVC pipe, making sure they’re evenly spaced.
  4. Insert foam padding: Cut foam padding to the length of the PVC pipe and insert it into the pipe.
  5. Attach the rack to your car: Place the PVC pipe on the roof of your car and use straps to secure it in place.

With these simple steps, you can build a car roof rack for your surfboard and transport it safely to the beach.

DIY Surfboard Rack

If you’re looking for a cost-effective way to store your surfboards, a DIY surfboard rack is the way to go. This is especially useful for families with multiple surfboards. A simple surfboard rack can hold up to five surfboards, while an advanced rack can hold more.

To make a basic surfboard rack, you’ll need angle shelf brackets, wood strips, a piece of plywood, rubber or foam mat, screws, round foam pipe insulation, eye hooks, and a long bungee cord. Here’s how to make it:

  1. Cut the wood strips to the desired length and attach the angle shelf brackets to each end of the strips.
  2. Screw the strips onto the plywood.
  3. Cut the foam pipe insulation into sections and attach them to the wood strips to protect your surfboards.
  4. Install eye hooks onto the top of the wood strips and attach the bungee cord to hold the surfboards in place.
  5. Place a rubber or foam mat on the ground to prevent damage to your surfboards.

With these simple steps, you can easily create a surfboard rack that will keep your boards safe and organized.

$20 Surfboard Rack for Scooter

If you’re planning on taking your scooter to the beach or the lake for some surfing or wakeboarding, you’ll need a way to carry your board. This DIY guide will show you how to build a surfboard rack for your scooter for just $20. With only a few simple tools, you can build this rack in about 30 minutes.

Materials:

  • 2 metal rods measuring 1.20m each
  • 2 galvanized square U bolts measuring 26mm each
  • 3 insulation pipes

To build the rack, simply follow these steps:

  1. Cut the insulation pipes in half.
  2. Slide each half of the insulation pipe onto each metal rod.
  3. Place the metal rods on the back of your scooter, making sure they are parallel to each other and perpendicular to the scooter.
  4. Use the U bolts to secure the metal rods to the scooter.

This surfboard rack is easy to install and remove, making it a great DIY project for any surfer on a budget.

How To Make A Surfboard Rack

If you have more than one surfboard, a surfboard rack is a necessary addition to your garage. With some woodworking tools and experience, you can build a customized rack to fit as many surfboards as possible depending on your available space. Here are the materials you’ll need:

  • 2400 x 1200 x 18mm marine plywood
  • Exterior PVA
  • 25mm nails
  • 50mm stainless-steel screws
  • 12g x 32mm galvanized screws
  • Power saw
  • Jigsaw
  • Handsaw
  • Router and 6mm rounding bit
  • Electric sander
  • Clamps
  • Drill and bits

Follow these steps to make your own surfboard rack:

  1. Cut the plywood into the desired size and shape for your rack.
  2. Use the router to create slots for the surfboards to rest in.
  3. Sand all the edges and surfaces of the plywood.
  4. Assemble the pieces with clamps and screws.
  5. Apply exterior PVA to protect the rack from moisture and damage.

With these steps, you can build a sturdy and functional surfboard rack to safely store your boards in your garage.

DIY Huge Surfboard Rack

If you have a lot of surfboards and want to save space in your garage, this DIY huge surfboard rack is the perfect solution. Not only does it save space, but it also adds a touch of furniture-like elegance to your garage. However, keep in mind that this rack is large and may not fit in smaller garages. If you have enough space, this rack can hold numerous surfboards, making it a great addition to any surfer’s collection. With this DIY project, you can create a functional and stylish surfboard rack that will impress your friends and family.

How to Secure a Surfboard to Your Car without a Roof Rack

Transporting surfboards can be a hassle, especially if you don’t have a roof rack. Fortunately, there is a simple and effective method for securing your surfboard(s) to your car using only two ratchet straps.

Here’s how to do it:

  1. Place the surfboard(s) on top of your car, with the fins facing up.
  2. Attach one end of a ratchet strap to the front of your car, just below the bumper.
  3. Loop the other end of the strap around the surfboard and attach it to the same point on the car.
  4. Repeat this process with a second strap, attaching it to the back of your car.

Make sure the straps are tight and secure before driving. This method may not be as convenient as using a roof rack, but it is a great alternative if you don’t want to install one. With a little practice, you’ll be able to strap your surfboard to your car quickly and easily, allowing you to hit the waves whenever you want.

$5 Outdoor Surfboard Rack

If you want to keep your surfboard safe from damage and thieves, building an outdoor surfboard rack could be a great option for you. The best part is that you can create an effective surf rack for just $5! In this tutorial, you will learn how to build a cheap surfboard rack with PVC pipes and fittings.

Materials:

  • T Junction
  • 90 Degree Elbow Bend
  • 45 Degree Elbow Bend
  • End Caps
  • PVC Pipe
  • PVC Solvent Cement

With these materials, you can create a simple and efficient surfboard rack that will keep your board safe and secure. Follow the tutorial to create your own $5 outdoor surfboard rack.

DIY Surfboard Wall Mount

Mounting your surfboard on the wall has never been easier with this DIY Surfboard Wall Mount. The mount is not only limited to surfboards, but also works perfectly with wakeboards and snowboards. Made up of high-quality aluminium, this mount is durable, strong, and sturdy. It is designed in such a way that it can be mounted anywhere, whether it’s in your garage, room, or lounge. The best part is that you can easily detach it from the wall and carry it anywhere.

Bicycle Surfboard Rack

When you want to take your surfboard with you on your bicycle, it can be difficult to carry it around. Luckily, you can create your own surfboard rack for your bicycle to make transportation easier. To make your own rack, you can use PVC pipes and connectors to attach the rack to your bicycle. This is a simple and effective way to carry your surfboard around. By following this tutorial, you can easily make your own bicycle surfboard rack and ensure that your board is always with you when you need it.

How to Build a Surfboard Rack

If you’re a DIY enthusiast, building your own surfboard rack can be an easy and cost-effective way to store your boards. With just a few pine boards, screws, and glue, you can build a rack that can hold up to 6 surfboards.

To get started, follow these simple steps:

  1. Gather your materials: You’ll need pine boards, screws, and glue. You can also add paint to customize your rack.
  2. Cut the boards: Cut the pine boards to the desired length and width of your rack.
  3. Assemble the rack: Use screws and glue to assemble the pine boards into a rack structure.
  4. Add support bars: Add support bars to the rack to ensure it can hold the weight of your surfboards.
  5. Paint (optional): If desired, paint your rack to add some color and style.

Remember, the length of your rack will depend on how many surfboards you plan to store, and the weight it needs to support. With these simple steps, you can build your own surfboard rack and save some money in the process.

DIY Surfboard Rack Free Downloadable Plans

If you’re looking for a way to keep your surfboards safe and save space, a surfboard rack is a great option to consider. With the free downloadable plans, you can easily make a rack that is big enough to hold up to four large surfboards. Before starting, make sure you have enough space to accommodate the rack. The making process is easy and should take no time at all. Here are some key features of the rack:

  • Can hold up to four large surfboards
  • Free downloadable plans available
  • Easy to make

By following the plans and taking the necessary precautions, you can have a surfboard rack that will keep your boards safe and organized.

Summary

When it comes to storing your surfboards, a DIY surfboard rack can be a cost-effective and customizable solution. By building your own rack, you can ensure that it fits your specific needs and space requirements. There are a variety of materials and designs to choose from, including wood, PVC pipe, and metal brackets. Consider factors such as weight capacity, number of boards, and ease of access when selecting your materials and design. With a little bit of planning and effort, you can create a functional and stylish surfboard rack that will keep your boards safe and organized.

Leave a Comment