17 DIY Lightsaber Ideas

Looking for a way to add some excitement to your kid’s daily life? Look no further than DIY lightsabers! While commercial lightsabers can be expensive, making your own functional prop at home is easy and fun. With our DIY Lightsaber Ideas and some basic hardware items, you can upgrade your skills and create a lightsaber suited for any occasion.

Using an Arduino board, you can easily craft a lightsaber that is both functional and affordable. Don’t waste your time and money on expensive and difficult-to-make designs found on the internet. Check out these improvised but practical DIY Lightsaber Ideas that are easy to make and perfect for any young Jedi.

How to Create a DIY Lightsaber

How to Create a DIY Lightsaber

Making your own lightsaber is a fun and easy project that kids and adults alike can enjoy. With just a few materials, you can create a realistic spinning lightsaber from scratch. Not only is this a great activity to do with your children, but it’s also educational, as it teaches them about magnets and electromagnetism.

To make your DIY lightsaber, you will need the following materials:

  • PVC pipe
  • Duct tape
  • Magnets
  • Copper wire
  • Batteries
  • Switch

To assemble your lightsaber, follow these simple steps:

  1. Cut the PVC pipe to the desired length of your lightsaber.
  2. Wrap the duct tape around the handle to create a comfortable grip.
  3. Attach the magnets to the ends of the PVC pipe.
  4. Wrap the copper wire around the PVC pipe, leaving a small gap for the switch.
  5. Attach the batteries and switch to the wire, making sure they are securely in place.
  6. Turn on the switch and watch your lightsaber come to life!

This DIY lightsaber is safe for kids because it does not light up and is lightweight, making it easy to handle. It’s a great way to bring the magic of Star Wars to life and have fun with your family. So why not give it a try and create your own lightsaber today!

Circuited Skywalker Lightsaber

Circuited Skywalker Lightsaber

Looking for a lightsaber that can deliver a single blow to your enemy? The Circuited Skywalker Lightsaber is the perfect weapon for you. This lightsaber is designed to provide hours of fun with its real flames and deep sound effects. With just a push of a button, you can activate the bright-bladed lightsaber that makes authentic sounds from the Star Wars universe. You can even customize the blade’s color to match your preference. Get ready to project the blade out at your opponent and strike them down with this amazing lightsaber.

DIY Lightsaber Pool Noodle

DIY Lightsaber Pool Noodle

Looking for an easy and cheap way to make a safe lightsaber for your child’s toy box? Look no further than a pool noodle! This versatile design allows you to adjust the size to fit your needs, providing hours of fun and excitement for your child as they use their imagination to create stories about their adventures with their lightsaber.

To make your own lightsaber, simply follow these easy instructions:

  1. Cut the pool noodle to your desired length.
  2. Cut a small slit in one end of the noodle.
  3. Insert a glow stick into the slit, making sure it is secure.
  4. Use duct tape to wrap the end of the noodle around the glow stick, creating the handle of the lightsaber.

And there you have it – a safe and durable lightsaber that will provide your child with years of fun and imaginative play. So why wait? Click the link above to get started on your own DIY lightsaber today!

DIY Lightsaber Prop

DIY Lightsaber Prop

Looking to create your own personal lightsaber? The Lightsaber Project has you covered. Using readily available parts, this project can be completed in 6-8 hours depending on your skill level. While the build may be costly due to the need for various components, the end result will be worth it. The Lightsaber Project provides video tutorials for each step, making the process easy to follow. Create the ultimate lightsaber prop and become the envy of all your friends. Click the link provided for more information.

DIY Lightsaber from Junks

DIY Lightsaber from Junks

Are you a big fan of Star Wars? Do you want to have your own lightsaber without spending a lot of money? Then this tutorial is perfect for you! With just a few bits of junk lying around your house, you can create your very own lightsaber. This ultimate trick to turning wasteful into beautiful will surely impress your friends and family.

To make your DIY lightsaber, you will need some tools for the project’s success. The total cost for this is about $20.00. Here are the materials you need:

Materials Quantity
PVC pipe 1
LED strip light 1
Electrical tape 1 roll
Batteries 2
Switch 1
Heat shrink tubing 1
Wire 1

Follow the link provided to access the tutorial and get started on building your very own lightsaber!

How to Make LED Lightsaber

Making your own LED lightsaber may seem like a daunting task, but with the right materials and instructions, it can be a fun and rewarding project. Here are the steps to create your own LED lightsaber:

  1. Gather materials: You will need a PVC pipe, LED strip, battery pack, wires, and a switch.
  2. Cut the PVC pipe: Cut the PVC pipe to the desired length of your lightsaber.
  3. Wire the LED strip: Cut the LED strip to the same length as the PVC pipe and solder wires to the positive and negative ends.
  4. Attach the LED strip: Attach the LED strip to the inside of the PVC pipe using double-sided tape or glue.
  5. Wire the battery pack: Solder wires to the battery pack and connect them to the switch.
  6. Attach the battery pack: Attach the battery pack to the bottom of the PVC pipe using zip ties or glue.
  7. Connect the wires: Connect the wires from the LED strip to the switch and battery pack.
  8. Test the lightsaber: Turn on the switch to test the lightsaber and make any necessary adjustments.

With these simple steps, you can create your very own LED lightsaber. May the force be with you!

RGB LED Strip Lightsaber

RGB LED Strip Lightsaber

If you are a Star Wars enthusiast, you can now create your very own RGB LED strip lightsaber with just a few common household items and seven simple steps. This DIY guide will teach you how to add electrical components and install LEDs to make a stunning and realistic lightsaber that you can use to reenact your favorite scenes from the epic Star Wars saga.

To create your LED Strip Saber, you will need the following items:

  • An LED strip
  • A battery pack
  • A switch
  • Electrical tape
  • A PVC pipe
  • A heat gun
  • A few other common household items

The seven-step video guide will take you through the process of assembling your lightsaber, from cutting and shaping the PVC pipe to installing the LED strip and wiring the electrical components. With a little bit of time and effort, you can create a lightsaber that looks and feels like the real thing.

So, if you’re ready to embark on a fun and exciting DIY project and create your very own RGB LED strip lightsaber, follow the steps laid out in the video guide and get ready to wield the power of the Force!

Make Your Combat Ready Lightsaber

Crafting your own Combat-Ready Lightsaber is an exciting and rewarding experience that requires some essential hardware and a willingness to learn. Beyond Geek DIY Builds offers a comprehensive tutorial video that explains every detail you need to know while assembling your new lightsaber.

To get started, you will need to invest some time and effort in researching the necessary materials and understanding how each piece fits together. The cost of the materials may be higher, but it is worth it for the satisfaction of having a unique, high-quality lightsaber that you made yourself.

While following the instructions, it is important to take your time and enjoy the process of building something useful. Don’t worry about making mistakes or failures, as they are a natural part of the learning process.

By following the Beyond Geek DIY Builds tutorial, you can create a combat-ready lightsaber that is perfect for cosplay, LARPing, or just for display. With a little patience and dedication, you can become the proud owner of a one-of-a-kind lightsaber that is sure to impress.

Easy DIY Lightsaber

Easy DIY Lightsaber

If you’re looking for a quick and easy DIY lightsaber, there are a few options available. One option is to purchase a cheap lightsaber toy, remove the blade, and replace it with a clear polycarbonate tube. You can then add LED lights inside the tube to create a glowing effect. Another option is to use a flashlight and attach a colored film to the end to create a lightsaber-like effect. Keep in mind that these DIY lightsabers may not hold up to intense play and may only stay lit for a short amount of time. However, they can still be a fun and inexpensive way to add some Star Wars flair to your next gathering.

Multi-Color DIY Lightsaber Blade Cheap

Creating a multi-color lightsaber blade is an easy and cheap DIY project. To make your own lightsaber, you will need the same materials as a single-colored lightsaber, but with a different type of LED. You can find this component at a reasonable price.

Follow these step-by-step instructions to create your very own multi-color lightsaber blade:

  1. Gather all the materials needed for the project, including a blade, hilt, LED strip, and battery pack.
  2. Cut the LED strip to the desired length and attach it to the blade.
  3. Connect the battery pack to the LED strip.
  4. Test the lightsaber to ensure that it is working properly.
  5. Experiment with different color combinations to create a unique and personalized lightsaber.

With these simple steps, you can create your very own colorful weapon of choice. It’s a fun and easy project that anyone can do.

How to Make a Flashlight Lightsaber

If you’re a Star Wars fan looking to make a DIY lightsaber, you’re in luck. With some simple materials, you can make a lightsaber blade that illuminates just like the real thing. Here’s how:

  1. Gather your materials. You’ll need a transparent plastic pipe, an LED flashlight, shiny aluminum foil, clothespins, and batteries.
  2. Cut the plastic pipe to your desired length for the lightsaber blade.
  3. Cover the inside of the pipe with shiny aluminum foil to reflect the light.
  4. Use clothespins to hold the neon tube in place inside the pipe.
  5. Connect the neon tube to the LED flashlight and batteries.
  6. Turn on the flashlight and enjoy your new lightsaber!

This procedure only takes about half an hour, so you can easily make multiple lightsabers at once. Whether you’re attending a Star Wars convention or just want to show off your DIY skills, this flashlight lightsaber is a fun and easy project to try at home.

Simply DIY Lightsaber

Simply DIY Lightsaber

If you are a Star Wars fan and want to build your own lightsaber, this is the perfect opportunity for you. The DIY lightsaber has evolved significantly since it was first released in 2006, and this version is the most customizable yet. With eight LED strips placed throughout the hilt, the display of light is sure to make you feel like a Jedi hero. This article will provide you with a good insight into how professional saber builders create their weapons. Click the link provided to begin your journey to building your own lightsaber.

Top-Notch Lightsaber Design

Top-Notch Lightsaber Design

If you’re looking to make a top-notch lightsaber, this step-by-step tutorial is just what you need. With 16 clear steps and helpful visuals, you’ll be able to complete the process relatively quickly. However, keep in mind that the process requires some intricate materials and components, which you can find by checking the linked sections of the shop. Don’t worry if you’re feeling overwhelmed; the brief explanation provided will be enough to get you started and keep track of your progress. Along the way, you’ll learn a few new terms and eventually complete the project to your satisfaction.

For more DIY sword ideas, click the link provided.

Mini Lightsaber Project

Mini Lightsaber Project

If you’re looking for a simple and fun project to do with your children, the mini lightsaber project is perfect for you. This project is designed to be the simplest lightsaber you can build, making it ideal for kids. However, it can also be satisfying for adults who want to spend quality time with their children.

To get started, simply download the instructions for the project. The instructions include everything you need to know, from how to use and interact with the lightsaber to the different types of lightsabers you can create. With a little focus on the throughout processing, you can create a fun and engaging project that your kids will love. Click the link above to get started!

DIY Lightsaber Ideas

DIY Lightsaber Ideas

Looking for a unique way to create your own lightsaber? Look no further! Here are some great DIY lightsaber ideas that vary in complexity. If you’re an experienced crafter, you may want to try an advanced version that includes sound and light effects. For those who prefer a simpler approach, basic electronics skills such as soldering and drilling can be used, or even tape instead of wiring. These easy-to-follow DIY lightsaber projects will guide you through crafting a functional unit using only a few simple materials and tools. Get ready to wield your very own personalized lightsaber!

Stylish And Cheap DIY Lightsaber Hilt

Create an epic and authentic lightsaber hilt with this easy-to-follow DIY kit. No experience is necessary, as the video tutorial will guide you through each step required to make a one-of-a-kind prop from the comfort of your own home. The finished product looks like it came straight off the screen and is made using high-quality materials. This is a great gift for Star Wars fans of any age, young and old. Plus, it’s easy to assemble and customize to your liking. With this kit, you can make a super cool lightsaber hilt that is both stylish and affordable.

Cheap & Easy Lightsaber Hilt

If you’re a Star Wars enthusiast looking for a quick and simple DIY project, this lightsaber hilt is perfect for you. Using only paper tubes and adhesive foil, you can create a righteous hilt that looks great and is easy to make. The most challenging part is cutting the paper tube to the correct length, but you can experiment with different colored foil to achieve various effects. Here’s what you’ll need to make your own cheap and easy lightsaber hilt:

  • Paper tubes
  • Adhesive foil
  • Glue

Simply follow these steps to create your lightsaber hilt:

  1. Cut the paper tube to the desired length.
  2. Cover the paper tube with adhesive foil.
  3. Use glue to attach the foil to the paper tube.
  4. Experiment with different colored foil to create unique effects.

With a little creativity, you can customize your lightsaber hilt to match your favorite Star Wars character or simply create a unique design. This DIY project is perfect for beginners and requires minimal time and effort.


If you’re a Star Wars fan looking to build your own lightsaber, there are a variety of DIY options available. From using PVC pipes and LED lights to 3D printing custom hilts, the possibilities are endless. You can also find pre-made kits online that include all the necessary components. With a little creativity and some basic tools, you can create a unique and functional lightsaber to show off at your next cosplay event or movie marathon.

Leave a Comment