If you’re a goat owner, you know the importance of a proper hay feeder. Not only does it prevent food waste, but it also keeps the hay fresh. Luckily, there are many DIY goat hay feeder plans available to build your own feeder from scratch. From simple to complex designs, there’s a plan that fits your budget, tools, and skills. Before you start building, make sure to read our tips and tricks to ensure a quality hay feeder for your goats. With 20 plans to choose from, you can save money and get started on your DIY project today.
Wall-Mounted Hay Feeder
If you need extra space for your goats or deer, a small-sized wall-mounted hay feeder might just be the solution you need. You can easily build this feeder using scrap wood or other materials you already have around. The advantage of having it mounted on the wall is that it saves floor space, but make sure there is enough space to open the lid.
The design of this feeder helps to keep the goat’s head above the ground while eating and prevents them from gnawing on the wooden edges. Additionally, the design of the feeder prevents excessive waste of hay, unlike trough-style feeders. Goats can only access the hay by tipping the back down, which encourages them to eat more efficiently.
This feeder takes up very little space on your wall, leaving plenty of room for other poultry supplies or decorative paint. If you don’t have space on a wall, you can even place it at the foot of your stairs or wherever is convenient for your goats to access.
Overall, building a wall-mounted hay feeder is a simple and effective way to provide your goats or deer with the hay they need while saving space and preventing waste.
DIY Wall Mounted Pallet Goat Feeder
If you’re looking for an easy and affordable way to feed your goats or rabbits, a DIY wall-mounted pallet feeder might be just what you need. With just one pallet and some scrap wood, you can create a sturdy feeder that will save you space and make feeding time a breeze.
To get started, you’ll need to gather your materials. You’ll need one pallet and some 2×4 scrap wood. You’ll also need basic measuring and cutting skills, as well as some nails or screws to fasten everything together.
To construct the feeder, begin by attaching two pieces of the 2x4s to the top of the pallet, and two pieces to the bottom. Then, attach one piece of 2×4 to each side of the pallet. Screw everything together securely, and you’ll have a simple yet effective wall-mounted feeder.
This design allows for more space to fill hay inside each time, and it’s easy to clean and use. Plus, since it’s wall-mounted, it won’t take up valuable floor space in your barn or coop.
Overall, this DIY wall-mounted pallet feeder is a great option for anyone looking for an easy and affordable way to feed their goats or rabbits. Give it a try and see how it can simplify your feeding routine!
DIY Goat Hay Feeder With Wheel
If you’re looking for a way to make your everyday hay management easier, a DIY goat hay feeder with a wheel might be just what you need. Not only does it hold three times more hay than a conventional feeder, but it is also sturdy and suitable for both young kids and full-grown goats. Plus, it has other purposes besides holding hay. Some people even use it as a decoration because of its unique design.
To make a goat hay feeder with a wheel, you’ll need wire mesh, two wheels, and 2×4 wood boards. The wire mesh should be cut in a V-shaped pattern and serve as the second portion of the feeder. The 2×4 boards will be used as the base to support the wire mesh, and a wooden tray at the bottom will prevent hay from getting scattered all over the ground.
Here are the steps to build your own goat hay feeder with a wheel:
- Build an X from 2×4 wood designed to fit a V-shaped metal shelf.
- Add legs on each side of the X.
- Put at least two wheels on the X.
- Attach the wire mesh to the X using screws or nails.
- Add the wooden tray at the bottom of the wire mesh to catch all the hay for efficient use and waste prevention.
Overall, building a DIY goat hay feeder with a wheel is a simple and affordable project that any DIY enthusiast can do. For more details on this project, visit luckypennyacres.org.
Double-Side Hay Feeder
If you are looking for a solution to prevent your goats from pushing each other and wasting hay during feeding, a double-sided hay feeder is a great option. This feeder is made of durable plastic and metal, with a large capacity of 30lb, making it accessible to all your small and large breed livestock, including poultry. The wide opening on both sides makes it easy for animals to enjoy food from both sides.
With its one-piece design, the top tray can be easily rotated without removing it, making it user-friendly. The double-sided hay feeder is also easy to clean and maintain. It can hold up to 1,000 pounds of grass, making it a great investment for small farms and boars.
This feeder is available at 5acresandadream.com, and its durability and ease of use make it a must-have for any livestock owner. Save money and time with this double-sided hay feeder, and ensure that your animals always have access to fresh hay.
Minimal Waste Hay Feeder
If you have a large number of goats or other livestock, you may find that the hay feeder in your barn is not enough to feed everyone. This can be a problem, as it can lead to wasted hay and increased costs. However, there is a solution that can help you save money and time, as well as space in your barn: a minimal waste hay feeder made from recycled materials.
To build this hay feeder, you will need some old 2×4 pallets or other scrap wood. The feeder is designed to utilize the space on the sides of the barn, rather than inside, which can help you save space. You can use the wood pieces to form an enclosure that is designed for some sort of storage.
One important thing to note is that the mesh in between the wooden bars is there to keep the hay from falling out of place. This hay feeder is perfect for animals such as goats, horses, or sheep, and can be easily built on a weekend using a minimal amount of materials.
If you decide to use old pallets or scrap wood, keep in mind that they may require painting or staining to resist decay and prevent your livestock from chewing the wood. With a little bit of effort, you can build a minimal waste hay feeder that will help you save money and keep your goats well-fed.
Hay Feeder for Small Livestock
If you’re looking for a hay feeder that can accommodate small livestock, this design might be perfect for you. With a length of approximately 4 feet, this feeder can hold different types of animal natures due to its flexible design. The foundation of this idea provides support and helps control waste, making it a great choice for animal lovers who want to save time, money, and energy.
The hay feeder is constructed with a 4-by-4 beam frame, making it strong and durable. The foundation part is one of the special features that strengthen the overall frame, ensuring that the hay does not fall to the ground when the animals eat. This design is suitable for small livestock like goats, sheep, and more, and can even be used for large critters like deer or as a rabbit feeder.
Using this hay feeder for your small livestock ensures that they are fed properly and that you have control over the amount of hay that is wasted. Additionally, this feeder is a great way to attract small livestock to your property, making it a must-have for any animal lover. Overall, this hay feeder is a great investment for those looking to provide their small livestock with a high-quality feeding option.
Project details: grit.com
Plastic Tub Goat Feeder
The Plastic Tub Goat Feeder is a practical solution for feeding multiple goats at once. Its 12L capacity allows up to 5 goats to feed together, saving time and effort. The wide mouth design ensures efficient feeding, reducing waste and mess. Made of durable and lightweight plastic, the feeder is easy to mount on the wall or in your barn with the brackets provided. Its convenient size and design make it ideal for small farms or homesteads. Get the Plastic Tub Goat Feeder today and make feeding your goats a breeze.
For more information on the Plastic Tub Goat Feeder, visit willowcreekfarm.wordpress.com.
Steel 8 Foot Hay Feeder Plans
If you want to build a hay feeder for your goats, steel tube is the best material to use. It is cheap and durable, making it the perfect choice for a goat feeder. However, most steel tubes are only about 5 feet tall, which can make it difficult to keep the feeder on a roof.
To build an 8-foot-tall feeder, you will need to prepare 40x40x2.0 SHS steel bars. This will allow you to see from the lower area and make sure all of your livestock are properly fed. The steel-tube hay feeder is a great piece of equipment to keep your livestock fed. Unlike wood, steel cannot be gnawed by goats.
The mesh bottom of the feeder is securely attached with steel bolts, making it easy to refill the feeder in a more convenient way. You can find more information and details about this project at kurraglenindustries.com.au.
Using steel tubes to build an 8-foot hay feeder for your goats is a cost-effective and durable solution. With the right materials and a little bit of know-how, you can easily build a feeder that will last for years to come.
Barrel & Scrap Wood Hay Feeder
When feeding hay in small spaces, the barrel and scrap wood style is the most common method. This involves using a wooden barrel or other heavy container to store the feed, with a “hayfork” being used to scoop out the required amount from the top and push it into a small hole for the horse to eat. The Barrel & Scrap Wood Hay Feeder prototype provides a better way to feed hay in small spaces. This model is unique in that it has only two parts instead of many, making it more convenient to replace if broken. Additionally, it is designed for easier cleaning and is relatively sturdy with two support bars on the bottom. This allows for easy access for humans and keeps hay dust out of the air and off surfaces.
For more information about this project, visit homesteadingongrace.com.
| Pros | Cons |
|---|---|
| Easy access for humans | None identified |
| Keeps hay dust out of the air and off surfaces | |
| Convenient to replace if broken | |
| Designed for easier cleaning | |
| Relatively sturdy with two support bars on the bottom |
Overall, the Barrel & Scrap Wood Hay Feeder prototype is a simple and effective solution for feeding hay in small spaces.
Easy Goat Hay Feeder From Steel Frame
If you’re looking for a simple and affordable way to feed your goats or calves, consider repurposing an IBC tank into a hay feeder. IBC tanks are large plastic containers that are commonly used to transport liquids such as paint, chemicals, gas, or oil. Once the contents are emptied, the tank can be refilled or discarded. Instead of throwing it away, you can use it to create a durable and easy-to-use hay feeder.
To make the hay feeder, you will need to assemble metal bars and ensure that they are sturdy enough to support the weight of the hay. Start by removing the plastic cover of the container by unscrewing it from the metal bars. Next, separate the metal bars and remove the plastic tub that holds liquid. Once you have completed these steps, reassemble the metal bars and plastic container to create the hay feeder.
Not only is this a great way to repurpose a discarded IBC tank, but it also provides a convenient and accessible feeding solution for your animals. With a little bit of DIY know-how and some basic materials, you can create a hay feeder that will last for years to come.
DIY Goat Hay Feeder:
If you have goats, you know how much they love to eat hay. However, feeding them can be a hassle, especially if you have multiple animals. The DIY Goat Hay Feeder Plans e-book provides step-by-step instructions for building your own hay feeder, making it easy and affordable to provide your goats with the food they need.
The materials required for this project are cheap and the tools needed are basic. The guide provides you with the measurements, dimensions, and patterns required to build a high-quality hay feeder. A detailed shopping list and outline are also included to ensure that you have everything you need before you start building.
To begin, the guide provides an overview of what to look for in a good hay feeder. It then gives you a complete list of parts you will need, along with suggestions for where to find the materials. The construction steps are clearly outlined, making it easy for you to follow along and build your own hay feeder.
Once you have built your hay feeder, the guide also includes maintenance tips to help you keep it in good condition. With the DIY Goat Hay Feeder Plans, you can save money while maintaining quality and ensuring that your goats are well-fed.
Build A Hay Feeder From Scraps
If you have a slat-walled barn and are looking for a hanging hay feeder, this DIY design is perfect for you. By hanging the feeder at a 45-degree angle, you will no longer have trouble with spilt hay or having to empty the feeder all the time. The construction is simple and cheap, as all you need is some scrap wood and tools.
To build this hay feeder, follow these easy steps:
- Cut two pieces of scrap wood to 2 feet in length and two pieces to 1 foot in length.
- Screw the 2-foot pieces to the 1-foot pieces to create a rectangular frame.
- Cut a piece of scrap wood to 2 feet in length and 1 foot in width.
- Screw this piece of wood to the bottom of the rectangular frame to create a base.
- Cut a piece of scrap wood to 2 feet in length and 2 inches in width.
- Screw this piece of wood to the top of the rectangular frame at a 45-degree angle.
- Cut a piece of scrap wood to 1 foot in length and 2 inches in width.
- Screw this piece of wood to the bottom of the angled piece to create a support.
- Cut a piece of scrap wood to 2 feet in length and 4 inches in width.
- Screw this piece of wood to the bottom of the rectangular frame to create a trough.
You can build both square and triangular versions of this hay feeder to suit your tastes. The triangular version is ideal for use in barns with slat walls because the slats can serve as stabilizers to ensure maximum performance. This design can be adapted to any wall structure, whether your walls are solid or made of plywood.
By following these easy steps, you can build a hay feeder from scraps that is perfect for storing hay for all the animals on your farm. Enjoy!
Goat Hay Feeder With Roof
If you’re a goat owner, you know how important it is to keep your goats healthy and well-fed. That’s why a goat hay feeder with a roof is a great investment. This feeder is designed to keep your goats’ hay dry, fresh, and easily accessible.
The feeder uses the principle of gravity to dispense hay, which means your goats will always have access to fresh hay. The rooftop of the feeder keeps the hay dry and protected from rodents and other animals, while the box under the feeder keeps hay from falling out and making a mess.
The frame of the feeder is made from high-quality redwood, and the joints are designed to be durable and long-lasting. The lean angle design of the feeder allows for effective gravity-powered hay dispensing, ensuring that your goats always have enough hay to eat.
Overall, the goat hay feeder with a roof is a great investment for any goat owner. Not only will it keep your goats healthy and well-fed, but it will also save you time and effort when it comes to feeding your goats. Try it out and see for yourself how much your goats will love it!
Large-Size Hay Feeder From Pallet
If you have many goats that need to eat at the same time, a large-size hay feeder from pallet may be the perfect solution for you. This feeder is designed with a V-shape that prevents goats from throwing hay off the bottom. The two sturdy wooden sides hold the pallet together, which has been disinfected before being placed into the feeder. You can make the feeder as large as you need to accommodate your herd.
To make the feeder, you can choose long side pallets that will allow your goats to eat more comfortably. If you recycle long side pallets, you can use any number of them to make the feeder larger or smaller depending on the space you have available. Simply cut off the unnecessary parts of the pallets, such as the short sides, to make them the right size for feeding your goats.
This feeder is not only practical but also durable. The pallets are strong and sturdy, and the wooden sides provide extra support. By using a large-size hay feeder from pallet, you can ensure that your goats have access to hay whenever they need it, without worrying about waste or mess.
For more details on how to make your own large-size hay feeder from pallet, check out bootsandhooveshomestead.com.
No-Waste Goat Feeder With Base
This wall-mounted goat feeder is designed with a base to collect excess hay or grass, preventing waste and promoting cleanliness. Here are some advantages of this feeder:
- You can collect excess grass from the base and put it back into the feeder above, ensuring that no hay or grass goes to waste.
- The base provides a more sanitary option compared to collecting unused hay scattered on the ground below a hay feeder.
- The feeder also provides a comfortable place for goats to rest while eating.
When considering the width of this wall-mount feeder, make sure there is enough space among goats standing side by side. This no-waste goat feeder with base is a practical addition to any farm or homestead. For more DIY goat shelter ideas, check out the link provided.
Fence Line Connected Goat Feeder
If you are a goat farmer looking for a space-saving and efficient goat feeder, a fence-line connected goat feeder might be the perfect solution for you. This design can be easily fixed to a fence, saving you space inside your barn or shed. Additionally, it can provide hay for multiple goats at the same time.
While this design does not have a roof, it is easy to shed rainwater. However, it may not provide the best protection for hay quality. On the other hand, this also means that fewer materials are needed for construction. If you live in an area with harsh winter conditions, you can install this goat feeder under a porch or in a sheltered area to ensure that your animals have access to food at all times.
This kind of fence-line connected goat feeder has been used by goat farmers in the US for years. The bottom of the feeder has a small wall to protect the hay, and it is covered with a piece of sheet metal to prevent water damage. Instead of a roof, four 2’x4′ pieces of plywood are supported by steel pipes to create a structure similar to a windmill. This design is commonly referred to as the “Windmill Feeder” because of its resemblance to a windmill.
To install this feeder, you can use clips or straps to attach it to a fence. This design is simple and easy to construct, making it a popular choice among goat farmers.
For more information on how to construct this fence-line connected goat feeder, you can visit the project details at challengedsurvival.blogspot.com.
Homemade Goat Hay Feeder
If you are a goat owner, you know that hay is a crucial part of their diet. However, feeding them can be time-consuming and expensive. Luckily, repurposing an old baby crib can be a cost-saving and time-saving solution to this problem. Building a homemade goat hay feeder from a crib has many benefits.
Firstly, it saves time as you only need to build it once, and then you can use it for a long time. Additionally, it is easy to build, even if you don’t have a blueprint or plan in mind. Lastly, it is cost-saving because you only need old wooden sheets and long wood sticks, which are readily available on your farm.
Using a homemade goat hay feeder also facilitates automation. Before the mother goat’s due date, build two buckets for storing water at least two days before the delivery. This feeder is a practical solution that can help you save time and money while ensuring that your goats get the nutrition they need.
To build your own homemade goat hay feeder, check out project details at weedemandreap.com.
Goat Feeder For Square Bales
If you have some scrap wood and unused 2×4 studs lying around, you can easily construct a DIY goat feeder for square bales. With just a little bit of carpentry skills, you can create a feeder that can store hay bales securely and allow many goats to eat simultaneously. The feeder comes with a roof that ensures the hay is safe from bad weather.
To construct this feeder, you will need 4 studs and 6 joists as the main materials. However, you can alter the design by adding an upper roof or installing doors on both sides. This will help keep the hay stored there fresh for longer, even if stored outside.
The goat feeder for square bales is not only easy to construct but also easy to carry and move. It’s a great way to provide your goats with fresh hay while keeping the hay protected from the elements.
Source: goatworld.com
Hay Feeder Under $30 From A Futon Frame
If you’re looking for an inexpensive and easy way to make a hay feeder for your goat, look no further. With just a few materials and 30 minutes of your time, you can create a hay feeder that will make feeding your goat a breeze.
The best part? You can make this hay feeder from a recycled futon frame. Futon frames are popular among goat owners because they are durable and affordable. To make this hay feeder, you will need four 5-inch u-bolts, plywood or a similar substrate, and 1 x 3-inch lumber for legs.
Here are the steps to make your hay feeder:
- Cut the plywood or substrate into a square shape that will fit under the futon frame base.
- Cut the 1 x 3-inch lumber into four legs.
- Attach the legs to the plywood using the u-bolts.
- Use wire to fix the legs to the frame.
It’s important to plan ahead and adjust the size of the futon frame to ensure a perfect fit for your goat. This hay feeder will make feeding your goat easier and more efficient. Plus, it will save you money in the long run.
In conclusion, building a hay feeder for your goat doesn’t have to be expensive or time-consuming. With a recycled futon frame and a few materials, you can create a hay feeder that will make feeding your goat a breeze.
Cattle Panel Goat Hay Feeder
If you are a small-scale farmer with limited space, our Cattle Panel Goat Hay Feeder is the perfect solution for feeding your goats. Goats prefer to eat in a group, but commercial hay feeders that hold numerous goats can be expensive. With our circular feeding system, you can construct a hay feeder for 8 to 15 goats in just 10 to 15 minutes.
The round feeder can serve more goats at once and is convenient for storage. It is also easy to hide and roll into a stall when not in use, making it easy to check on your goats. While you can’t buy a commercial round or oval feeder, our DIY design using Cattle Panel, green metal clips, fence staples, and extra screws for attaching the lid, is simple to make.
To make the feeder, you will need a 16-foot section of cattle panel, bolt cutters, a metal file or grinder, and heavy wire, fasteners, or zip ties. The feeder has a diameter of 38 inches and is perfect for small-scale farmers.
Overall, our Cattle Panel Goat Hay Feeder is an affordable and convenient solution for feeding your goats in a group. With our easy-to-follow instructions, you can construct a feeder in no time and ensure that your goats are happy and well-fed.
Cheap Goat Feeder
If you’re on a tight budget or just looking for a simple goat feeder, this DIY design is a great option. The best part is that it won’t cost much if you already have a used plastic barrel. Here’s how to make it:
Materials:
- Used plastic barrel
- Two cement blocks
- Hay
Instructions:
- Cut a hole in the side of the plastic barrel, big enough for the goats to stick their heads in and eat.
- Place the barrel on top of the two cement blocks to elevate it off the ground.
- Fill the barrel with hay.
- Your goats can now eat hay from the barrel, and the cement blocks will prevent it from tipping over.
This design is super simple and affordable, making it a great choice for those on a tight budget. Additionally, the cement blocks beef up the bottom of the feeder, making it completely waterproof. With this DIY cheap goat feeder, you can provide your goats with a convenient and economical way to eat hay.
Summary
To make a DIY goat hay feeder, you will need basic woodworking skills and tools such as a saw, drill, and screws. The feeder should be sturdy and have a slanted roof to prevent hay from accumulating on top. You can use PVC pipes to create a hay rack and attach it to the feeder. Additionally, adding a bottom tray can prevent hay wastage and make cleaning easier. Overall, a homemade goat hay feeder can save you money and provide a functional solution for feeding your goats.
