30 DIY Guitar Stand Ideas And Plans

If you’re tired of leaning your guitar against the wall and risking damage, or struggling to access it quickly from a hard case, a DIY guitar stand could be the solution you need. With 35 different plans to choose from, you’re sure to find one that fits your needs and style. From simple wooden stands to multi-guitar racks and even 3D printed options, these DIY stands offer both convenience and protection for your beloved instrument.

DIY Wooden Guitar Stand With Essential Power Tools

DIY Wooden Guitar Stand With Essential Power Tools

If you’re looking for a stylish and functional way to display your guitar, this DIY wooden guitar stand is the perfect project for you. The stand features a curved neck and boomerang base, giving it an elegant look that will complement any room.

To get started, you’ll need to download the free template from woodworkjunkie.com and apply it to your wood piece to create the curved edges. Next, sand all parts as smoothly as possible before assembly with chipboard screws.

For added stability, we recommend fitting rubber studs to the base’s bottom and adding a buffer to the cradle to prevent scratches. This will ensure a sturdy foundation for your guitar.

With the help of essential power tools, you can create a beautiful and functional wooden guitar stand that will showcase your instrument in style.

Smallest and Affordable DIY Guitar Stand from PVC

Smallest and Affordable DIY Guitar Stand from PVC

Building a guitar stand from PVC pipe is a cheap and easy project that can be done with just a few materials. To make this stand, you will need four 4.33-inch and four 1.96-inch parts of PVC pipe, three right-angle connectors, two T connectors, and four rubber feet. You can purchase these items at a hardware store and ask the store owner to cut the PVC pipe to the required lengths.

Once you have all the materials, assembly is quick and easy. No glue is needed for the front feet, so you can adjust them to fit different guitar bodies. Keep in mind that this stand is not as sturdy as wooden stands, but it is a great option for those on a budget.

For more information on this project, visit thecavanproject.com.

DIY PVC Multiple Guitar Stand

DIY PVC Multiple Guitar Stand

If you have multiple guitars, you might want to consider making a PVC stand that is both affordable and easy to build. To create this stand, you will need ¾-inch PVC pipes that have been cut in half and assembled with T connectors, elbows, and caps. The dimensions of the stand are 32 inches high, 27 inches wide, and 32 inches in the front and back.

To protect your guitars from scratches and humidity, attach rubber insulation foam to the stand where it touches the instruments. This will ensure that your guitars remain in pristine condition.

For more detailed instructions on how to build this PVC stand, visit instructables.com.

DIY Hanging Guitar Stand

DIY Hanging Guitar Stand

If you’re a guitarist looking for a space-saving and artistic way to store and display your guitar, a curved free-standing guitar stand might be just what you need. And the good news is that you can easily build one yourself with just a few components.

To build this stand, you’ll need a flat base, an upright arm with perfect curves, and a cradle hold. The size of the arm should be 2x the depth of your guitar, while the height should be longer than the gear. The base front to back should be three times wider than the depth of the guitar.

With these dimensions, your stand will be stable enough to hold even a heavy guitar without flipping over. You can find more details on how to build this stand on instructables.com.

DIY Simple Guitar Stand From A Single Board of Wood

DIY Simple Guitar Stand From A Single Board of Wood

If you’re looking for a simple and elegant guitar stand, this DIY project might be just what you need. The design combines two L-shaped lumbers that you can make with several jigsaw cuttings from a single board of wood. This means that no material is wasted in the process.

To make the stand, simply draw two L-shapes on the board and cut them out with a jigsaw. Then, drill two 25mm holes to fit the two parts together. The holes are round and off-center to ensure a snug fit.

One important thing to keep in mind is to sand the two parts into a perfect interlock. When finished, the stand will have a nice contrast with your polished guitar.

Overall, this project is straightforward to make and requires minimal materials. You can find more details and instructions on makezine.com.

Build A Custom Guitar Stand

Build A Custom Guitar Stand

If you want to showcase your guitar in style, building a custom guitar stand is a great option. The inverted “Y” shape of the stand provides a strong foundation for your heavy gear, while the three legs attached to the upright piece at 30 degrees ensure stability. The two arms that support the body of your guitar are also creative, with curves on the top to hold the guitar’s body and add a decorative touch. The stand also features tuning pegs painted in black and white on the other sides. You can find more details on this project at woodworkweb.com.

A-Frame Wood Guitar Stand

A-Frame Wood Guitar Stand

If you’re looking for a foldable guitar stand, the A-Frame Wood Guitar Stand might be a good option. This stand has a unique shape with two legs that are flexibly connected with a collapsible hinge and hanging basket chain. Stability is important when it comes to guitar stands, and the A-Frame Wood Guitar Stand ensures that both legs are the same length to provide a stable base for your guitar. The legs can be left flat for larger guitars or curved for a more attractive look. Check out the project details at sprwmn.blogspot.com for more information.

Guitar Stand Plan With A Drawer

Guitar Stand Plan With A Drawer
Guitar Stand Plan With A Drawer

If you are looking for a free-standing guitar stand that does not put tension on the neck and strings, you can try building one with a drawer. This design features two curved wooden boards that follow the shape of your guitar’s bouts and are sanded for a smooth finish. The distance between the boards is slightly smaller than the width of the guitar body, ensuring a snug fit.

What sets this guitar stand apart is the drawer on the side, providing a convenient storage space for your guitar tools. With everything in one place, you can easily tune your guitar and have it ready to rock at all times.

For more details on building this guitar stand, you can visit guitar.lovetoknow.com.

DIY Wall Mount Guitar Holder

DIY Wall Mount Guitar Holder

If you have a collection of guitars and want to easily access them, a DIY wall mount guitar holder might be the perfect solution for you. Here are the steps to create your own wall mount guitar holder:

  1. Prepare a spacious wall for your guitar collection.
  2. Purchase solid utility wall hooks, screws, anchors, and some sort of wood. You can cut the wood into rectangular pieces.
  3. Paint the wood pieces with the hook’s color before drilling two holes one inch from each end: one spot to screw the wood part onto the wall, and the other is to assemble the hook.
  4. Assemble the hooks onto the wood pieces.
  5. Screw the wood pieces onto the wall, making sure they are level and secure.
  6. Hang your guitars on the hooks.

This simple and affordable DIY project will not only help you easily access your guitar collection, but it will also give your guitars the spotlight they deserve. For more details on this project, visit houseandcanvas.com.

DIY Cheap & Easy Guitar Stand Plan

DIY Cheap & Easy Guitar Stand Plan

If you are looking for a budget-friendly and effortless way to store your guitars, building a DIY guitar stand is a great option. This plan involves creating a stand with neck cutouts and resting pieces where you can place your guitar on the cutout and support its body. Here are some notes to keep in mind while making this plan:

  • Ensure that you do not drill neck cutouts too closely to avoid bumping guitars on each other. There are holes for six guitars, and each is four inches apart.
  • To increase stability and rigidity, rotate the resting pieces where the guitars’ bodies will rest.
  • Paint the stand all black and add a white strip with tape to make it look more stylish.
  • Add padding foam to the neck cutouts and resting bars to protect your guitars from scratches.

If you have fewer guitars, consider reducing the cutouts accordingly. For more details on this project, visit rookiediy.com.

Multi Guitar Rack By 3×3 Custom

Multi Guitar Rack By 3×3 Custom

If you are a guitar enthusiast and have multiple guitars, then you should consider getting a multi-guitar rack. The 3×3 Custom multi-guitar rack is a great option to keep your guitars organized and within reach.

This rack is designed to be solid and balanced enough to hold multiple guitars of different sizes and weights. The stand is constructed using tenon joints, which makes it stronger and less likely to tip over.

The dowel rack is drilled in different sizes to accommodate various types of guitars with different neck sizes. The A-shape legs and resting bars are also snuggly connected with tenon joints, ensuring that the stand is sturdy and durable.

Overall, the 3×3 Custom multi-guitar rack is a great investment for any guitar enthusiast who wants to keep their guitars organized and safe. For more information on this project, visit 3x3custom.com.

DIY Guitar Hanger By Crafted Workshop

If you’re looking for a unique way to display your guitar, consider making a wall bent-lamination hanger. Crafted Workshop has a great tutorial on how to make one yourself.

To start, you’ll need to create a form using 5 pieces of plywood that have been sanded smooth. Then, use 2-ply wood veneers and shape them to the form to achieve the desired curve for the hanger.

The hanger is made up of eight pieces of veneer that are clamped and glued together to ensure it can support the weight of your guitar. One end of the hanger has a curved opening that is 2 inches wide and 1 ¾ inches deep, perfect for attaching your guitar.

To protect your guitar from scratches, it’s recommended to pad the entire hanger with soft leather.

Overall, this DIY guitar hanger is a great way to showcase your instrument and keep it within easy reach for whenever you want to play.

DIY Guitar Stand From PVC Pipe

DIY Guitar Stand From PVC Pipe

If you’re looking for a sturdy and secure guitar stand, this DIY PVC stand might be just what you need. Although it may look complicated and space-wasting, its design is meant to improve the sturdiness of the stand. The stand consists of two frames on the upper and lower, connected by a straight pipe in the middle. This creates a natural leaning position against the floor so that your guitar can rest securely. To improve the look and feel of the stand, spray it and add foam where the guitar touches the stand. Check out the project details on imgur.com for more information.

Easy Folding Guitar Stand

If you’re a musician who needs a guitar stand that’s easy to store and transport, the Easy Folding Guitar Stand might be just what you’re looking for. This plan requires a lot of cutting, measuring, and sanding, so make sure you have the necessary woodworking tools before you get started.

The stand consists of two identical legs that are screwed tightly on the top but can fold in the middle with dado cuts and pivot joints. When expanded, it takes the shape of an A. To ensure that the two parts can move freely, use a long screw instead of a bolt and a nut in the pivot.

There is a brass stock on the back of the legs with a diagonal hook on one side. This hook can be used as a fixed stop or unhooked when the stand is not in use. With this design, you can easily store and transport your guitar stand without taking up too much space.

Build a Foldable Guitar Stand from Pretty Handy Girl

Build a Foldable Guitar Stand from Pretty Handy Girl

If you’re looking for a portable and space-saving guitar stand, building one yourself can be a great option. Pretty Handy Girl provides a guide on how to build a folding guitar stand that can be easily assembled and disassembled for travel.

To create this stand, you’ll need to drill holes through the top of the sides and fit a ¾-inch dowel rod through them. You’ll also need to create two additional holes six inches above the floor in the back of the stand, where you can attach a latch to lift and secure the stand.

To ensure stability, the stand is designed to support the guitar’s neck with adjustable sides on the dowel rod. However, this project does require some woodworking experience, as it involves creating pocket holes and curving cuttings on the top of the stand.

With a height of 35 inches, this stand provides ample support for your guitar. By following Pretty Handy Girl’s guide, you can create a foldable guitar stand that is both practical and stylish.

Knockdown Cherry Guitar Stand

Knockdown Cherry Guitar Stand

If you’re looking for a stylish and space-saving way to store and display your bass guitar, the Knockdown Cherry Guitar Stand might be just what you need. This project features a unique design that expands towards two sides, creating interesting similarities between the top notches and the base.

To create a uniform and smooth edge, you’ll need to do plenty of sanding and shaping. It’s also important to ensure that the base is stable and won’t tip over easily. Adding a third notch behind the bottom of the stand can help the base fit securely on the floor and create a stable, rock-solid foundation.

Overall, this project is a great way to showcase your bass guitar while keeping it safely stored and out of the way when not in use. For detailed instructions on how to build the Knockdown Cherry Guitar Stand, check out instructables.com.

Inexpensive Guitar Stand From PVC Pipe

Looking for a cheap and easy way to store your guitar? Look no further than this DIY guitar stand made from PVC pipes. With just a few simple cuts and some basic assembly, you can have a sturdy and reliable guitar stand in no time.

To start, you’ll need some ½-inch ¾ pipe and T connectors, which are readily available at most hardware stores. Begin by using three Ts to create the middle of the base, with one facing up at the center. Then, use two elbows for the back and two Ts for the front of the base.

Next, assemble the top using a 12-inch straight pipe and a T connector. Finally, cap off all the open parts, including the four feet and the T on top. You can also sand all components to make them smoother when contacting the guitar.

When installing the PVC pieces, make the base a little crooked so that the guitar can hook onto it. With this simple and inexpensive DIY project, you can have a reliable guitar stand that won’t break the bank.

DIY Modern Guitar Stand

If you want a guitar stand that looks neat, sturdy, and extra balanced, then you should consider making a DIY modern guitar stand. To build this stand, you will need maple wood for superior hardness and uniform color. The key to success is cutting all parts perfectly equal. You can cut the templates first and then use tape to stick two parallel bases and arms and go through band saw and sanding machines.

Once you have all the pieces, set up the shape as shown in the video and drill them together. Additionally, you can use glue on the holes to enhance the sturdiness of the stand. This guitar stand can store three or four guitars that simply lean to the crossing bar on the top, making it suitable for different size guitars.

Overall, building a DIY modern guitar stand is a great way to showcase your guitars while keeping them safe and organized.

DIY Guitar Stand Created from an Old Amplifier

DIY Guitar Stand Created from an Old Amplifier

If you have an old amplifier lying around and want to create a unique guitar stand, this project is perfect for you. By removing all of the internal components, you will have a sturdy frame to build upon.

To create the guitar rests, cut rectangular holes into the top of the amplifier. Be sure to space them out appropriately to avoid any damage or bumping between your guitars.

On the bottom, attach a box and add boards to divide it into spaces for the guitars’ bodies. Cover the boards with a thick vinyl cloth and add rubber foam on the neck cutouts to prevent any damages.

This project is a great way to repurpose an old amplifier and create a one-of-a-kind guitar stand for your collection. Check out imgur.com for more project details.

DIY Wooden Guitar Stand By Instructables

DIY Wooden Guitar Stand By Instructables

If you’re looking for a compact and stylish way to display your guitars, then you might want to consider making a DIY wooden guitar stand. Instructables.com has a great tutorial on how to make your own guitar stand using a 1×12 wood board that is two feet long.

To start, cut the board into two L shapes that are the same size. It’s recommended to print out a template and adhere it to the wood to ensure accurate cutting. You can use a bandsaw or jigsaw to cut the shape, following the drawing line as closely as possible.

For more accurate cutting, you can drill a hole in the side of two legs so that the flush trim of the router can get into this tight corner. You can also customize the size of the stand to fit your guitars and even engrave your favorite quote on the stand with a CNC router.

Overall, this DIY wooden guitar stand is a great way to display your guitars and add a personal touch to your space. Visit instructables.com for more project details.

DIY Multiple Guitar Stand By Instructables

DIY Multiple Guitar Stand By Instructables

If you’re looking for a unique and simple way to keep your guitars organized, the DIY Multiple Guitar Stand by Instructables is a great option. This project involves using wine corks and drywall screws to create a sturdy stand for multiple guitars. The legs of the stand are 28 inches long and serve two purposes: providing a solid foundation for the stand and supporting two bars for the guitar bodies. You can adjust the distance between the bars to accommodate the width of your guitars, with a distance of around 12 inches used in the project. With minimal cutting and sanding required, this project is a great option for any guitar enthusiast. For more information, check out instructables.com.

DIY Guitar Stand With Elegant Curves

DIY Guitar Stand With Elegant Curves

If you’re looking for a guitar stand that’s both functional and aesthetically pleasing, this DIY project is for you. The stand features beautifully curved legs that mimic the shape of your guitar’s body. To create this stand, you’ll need to draw a template and carefully sand the edges to ensure a smooth finish. While the rear leg and rest section may appear challenging at first glance, they’re actually two parts aligned and combined with a dowel. With patience and attention to detail, you’ll have a professional-looking guitar stand in no time. For more detailed instructions, check out woodarchivist.com.

DIY Guitar Wall Mount With Affordable Price

If you are looking for a cheap and easy way to mount your guitar on the wall, then this DIY project is for you. The materials you will need include a sturdy utility hook, a scrap 2×4, four 3-inch screws, and drywall anchors. Optional materials include paints and stains.

To begin, cut a 2×4 square board and draw an X in the middle. The screws will come in the X line and one inch from each stock corner. Drill a hole in the center to assemble your utility hook after.

Next, spray paint on the board and screw it onto the wall. Finally, attach the hook, and you are done with a wall mount to hang out your guitar.

This DIY guitar wall mount is a cost-effective solution that provides a sturdy and secure way to display your guitar. With just a few materials and some basic tools, you can create a custom wall mount that will keep your guitar safe and sound.

 Make A Wooden Guitar Stand

Building a guitar stand out of wood is a simple and affordable project that can be done in no time. To start, you will need two L-shaped wooden pieces. If you want to add some style, you can curve the legs and body of the stand using a bandsaw and then sand the edges for a smooth finish.

Next, install a hinge on the top of the wooden pieces to hold the guitar securely. To complete the project, drill two holes on the bottom of the legs and thread a string through them. It is important to choose a non-elastic string to ensure that the stand remains sturdy over time.

When you expand the two legs, the string will become tense and provide a stable stop to keep the guitar in place. This simple wooden guitar stand is perfect for displaying your guitar while keeping it safe and secure.

DIY Winged Guitar Stand

DIY Winged Guitar Stand

If you’re looking for a unique and artistic way to display your guitar, consider building a DIY winged guitar stand. This stand features two angel wings on the back of the guitar that are visible without dominating the room. The stand has a flat lower resting stably on the floor and two slightly curved legs to support the guitar.

To create the wings, draw a template that swoops very high to show the scalloped feather shape and has a narrow sweep down. Apply the template on the wood piece and cut the curve with a jigsaw or xCarve. Behind the wings is a shelf to hold them at a constant angle and prevent the stand from tipping over. The shelf is also suitable for storing picks, capos, tuners, and other odds and ends.

This project is perfect for those who want to showcase their artistic side and create a functional piece of furniture for their guitar. For more detailed instructions, visit instructables.com.

DIY 3D Printed Guitar Stand

DIY 3D Printed Guitar Stand

If you’re looking for an affordable and sturdy guitar stand, you can easily build one yourself using ⅝-inch dowels cut to the desired sizes. Here’s how:

  1. Cut one long dowel for the neck support, three dowels for the legs, two dowels for the cradle hole, and another two for the lower base.
  2. Install the legs tightly and insert them into the centerpiece.
  3. If any dowels loosen, use glue to tighten the entire stand.
  4. The guitar can stand freely on the lower base without any tension.

This DIY guitar stand is perfect for those who want to save money and have a personalized touch to their music gear. For more information on this project, visit kevinrye.net.

DIY A PVC Guitar Rack Stand Plan

DIY A PVC Guitar Rack Stand Plan

If you’re looking for a simple and affordable way to store your guitars, a PVC guitar rack stand might be the perfect solution for you. With just a few materials and less than two hours of your time, you can create a sturdy and functional guitar stand that can hold up to six guitars.

To create this stand, you’ll need a ¾-inch PVC pipe that is 20 feet long, as well as 16 T connectors, six elbows, and six caps. The PVC material is lightweight, so it’s important to add a crossing bar between the two sides to make it sturdier.

On the top of the stand, you can create a rack with six slots, each four inches apart, to form five separate resting sections for your guitars. Additionally, you can install two resting bars on the bottom to support the bodies of the guitars.

To complete the plan, add glue around the connection parts and cover the top and bottom bars with padding to protect your guitars from scratches. However, keep in mind that the legs of the stand are too close to the ground, so you should add rubber feet or use longer caps on the four legs to prevent your guitars from touching the floor.

Overall, this DIY PVC guitar rack stand is a great option for those who want a simple and affordable way to store their guitars. For more details on how to make this stand, you can visit howtomakeaguitarrack.wordpress.com.

Make A Multi Guitar Stand By I Like To Make Stuff

To create a multi-guitar stand, I Like To Make Stuff recommends combining wooden pieces and aluminum extrusion. The wooden legs are rectangular and have two 70-degree angles, providing balance for the stand and space for the bars to go through. However, when assembled, the bars may be too close to the ground. To fix this, four rubber pads can be added under the legs to lift the stand slightly.

On the other end of the stand, an extrusion replaces the wood rack. Nuts can be inserted between the extrusion, allowing for the prototypes to be cut and installed based on the number of guitars you have. It is suggested to cover the prototypes and supporting bars with leather to prevent wear and tear.

By utilizing both wood and extrusion, this multi-guitar stand is both practical and convenient.

DIY Wall Mount Guitar Holder

DIY Wall Mount Guitar Holder

If you don’t have space for standing racks, you can create a wall mounting holder with just two simple parts. To make this holder, you’ll need a 4 ½ inch part to hold the guitar and a 5 ½ inch board to be screwed onto the wall. You’ll also need to make two Kreg Jigs on this board to connect the other holding part.

It’s important to measure the guitar neck for suitability. The slot of headstock should be smaller than the base of headstock but larger than the neck’s top guitar. This way, the guitar can be hooked securely on the holder.

For more information and project details, check out lemonthistle.com.

Simple DIY Guitar Stand By Guitar Talk

Simple DIY Guitar Stand By Guitar Talk

If you’re looking for an easy DIY project for your guitar collection, then this simple guitar stand by Guitar Talk is perfect for you. The stand is designed to hold up to four guitars and is made using PVC pipes and fittings.

To make the stand, you’ll need 90-degree inspection bends and round inspection covers to create the arms. These arms are slightly larger at the top to ensure that your guitars stay securely in place.

It’s important to cover the connection parts with padding to protect your guitars from scratches and damages. Additionally, adding rubber feet under the legs will prevent your guitars from coming into contact with the ground and getting damaged by humidity.

For more details on how to build this stand, check out the community.guitartalk.co.za website. With this simple DIY project, you’ll have a secure and stylish way to display your guitar collection.

Summary

To build your own guitar stand, you can choose from a variety of designs and materials. Some popular options include using PVC pipes, wood, or metal. Consider the size and weight of your guitar when selecting a design. You may also want to add padding or non-slip material to protect your guitar. With a little creativity and effort, you can create a custom guitar stand that fits your style and needs.

Leave a Comment