14 DIY Irrigation Systems Ideas & Plans

Do you have a garden that needs constant watering? Hand watering can be time-consuming, especially if you have a large garden. Luckily, there are cheap and easy DIY irrigation systems that can take the difficulty out of keeping your garden watered.

In this article, we will introduce you to 16 easy DIY irrigation systems that you can install in your garden. From a simple bucket irrigation system to a repurposed plastic bottle irrigation system, we’ve got you covered. Say goodbye to hand watering and hello to a garden that waters itself!

3. PVC Pipe Irrigation System

PVC Pipe Irrigation System

Looking for a simple and inexpensive way to keep your garden or lawn watered during hot summer months? Consider building a PVC pipe irrigation system. This system uses a sprinkler-type setup to distribute water where it’s needed. With a few key supplies, including PVC pipe, you can easily build this system yourself. Just be sure to keep an eye on any little ones who may be tempted to run through the sprinklers on a hot day. For a tutorial on how to build your own PVC pipe irrigation system, check out Budget101.

1. Easy Outdoor Drip Irrigation System

Easy Outdoor Drip Irrigation System

Looking for an easy and inexpensive way to water your garden? Look no further than this simple drip irrigation system. With just a few supplies that you may already have on hand, or can easily acquire, you can set up this system in no time. Simply hook it up to your outdoor faucet and let it water your garden as needed. When you’re done, you can easily unhook it and use your outdoor water supply for other purposes. Check out this tutorial from This Old House for step-by-step instructions on how to set up your own easy outdoor drip irrigation system.

5. Budget-Friendly DIY Irrigation System – Less Than $10!

Looking for an affordable way to keep your garden hydrated? Look no further than this DIY irrigation system! With a storage bin as your water supply, you can easily assemble this system for under $10. Say goodbye to worrying about thirsty plants, as this system will keep your garden perfectly watered. It’s a simple and effective solution for any gardener on a budget.

6. DIY Drip Line Irrigation System

DIY Drip Line Irrigation System

If you want to ensure that each plant in your garden is watered perfectly, a drip line irrigation system is the way to go. By adding an automatic timer, you can set it to water your plants at the right time of the day. It is recommended that you water your plants around dusk to avoid watering them during the hottest part of the day. You can find a helpful tutorial on how to create your own DIY drip line irrigation system at home on homefortheharvest.

14. Cheap DIY Drip Irrigation

Cheap DIY Drip Irrigation

If you’re looking for a cheap and easy way to set up a drip irrigation system for your garden, this tutorial is for you. With just a few basic supplies and a couple of hours of your time, you can create a simple and effective system that will help keep your plants healthy and hydrated.

This particular system is designed for an in-ground garden, but it can easily be adapted for use in a raised garden bed. The tutorial, provided by Lifehacker, offers step-by-step instructions and helpful tips to guide you through the process.

To create your own DIY drip irrigation system, you’ll need a few basic supplies, including:

  • A hose
  • A drip irrigation kit
  • A drill
  • A few basic tools

By following the tutorial and using these supplies, you can create a system that will water your plants efficiently and effectively, without breaking the bank. So if you’re looking for a simple and affordable way to keep your garden healthy, give this DIY drip irrigation system a try.

7. DIY Automatic Drip Irrigation System

DIY Automatic Drip Irrigation System

An automatic drip irrigation system is a great way to deliver water to your plants without needing to do it manually. This system can be easily built using a few different materials, depending on what you have on hand. Here are some tips to help you build your own DIY automatic drip irrigation system:

  • Use a timer to set the watering schedule for your plants. This will ensure that they receive the right amount of water at the right time.
  • Choose the right material for your irrigation system. PVC pipes, soaker hoses, and drip lines are all good options.
  • Make sure your system is properly installed and connected to your water supply. You may need to use adapters or connectors to ensure a secure fit.
  • Test your system before planting to make sure it is working properly. This will save you time and effort in the long run.

By building your own automatic drip irrigation system, you can save time and money while ensuring that your plants get the water they need to thrive.

8. Dual System DIY Irrigation

Dual System DIY Irrigation

If you have a garden with different types of plants that require different watering needs, a dual system DIY irrigation may be the solution for you. This system allows you to have two separate irrigation lines, each with its own timer and watering schedule.

Here are some steps to create your own dual system DIY irrigation:

  1. Determine the watering needs of your plants: Before installing the irrigation system, you need to know the watering needs of your plants. Some plants require more water than others, so it’s important to group them accordingly.
  2. Install the irrigation lines: Once you have determined the watering needs of your plants, you can install the irrigation lines. You will need to install two separate lines, one for each group of plants. Make sure to use the appropriate size of tubing and fittings for your system.
  3. Install the timers: You will need to install two separate timers, one for each irrigation line. Set the timers based on the watering needs of your plants.
  4. Test the system: Before you start using the system, test it to make sure everything is working properly. Turn on each irrigation line separately and check for any leaks or malfunctions.
  5. Adjust the system: Once you have tested the system, you may need to make adjustments. If one group of plants is receiving too much or too little water, you can adjust the timer accordingly.

A dual system DIY irrigation can be a great way to ensure that all of your plants are getting the right amount of water. With a little bit of planning and effort, you can create a system that will keep your garden healthy and thriving.

16. Repurposed Plastic Bottle Irrigation System

Looking for a cost-effective way to water your plants? Consider creating a DIY irrigation system using repurposed plastic bottles. This simple and straightforward process allows you to reuse old bottles and save money on expensive water containers.

To get started, gather your plastic bottles and cut off the bottoms. Then, bury the bottles upside down in your garden bed, leaving the cap end exposed. Fill the bottles with water and let the water slowly seep into the soil, providing hydration to your plants.

This repurposed plastic bottle irrigation system is a great addition to any traditional in-ground garden or raised garden bed. Plus, it’s an eco-friendly way to reuse plastic bottles and reduce waste.

For a step-by-step tutorial on how to create your own repurposed plastic bottle irrigation system, check out Provident Living’s guide.

9. Cheap and Easy PVC Water Run

If you’re looking for an affordable and straightforward irrigation system, then a PVC water run is the perfect solution. With just under $100 and a few essential supplies, you can set up this system in no time. This irrigation system is suitable for both traditional and container gardens, making it ideal for keeping your herb gardens and other above-ground plants hydrated.

To make this system, you will need PVC pipes and a few other supplies. The tutorial on instructables provides a step-by-step guide on how to assemble this irrigation system. Using PVC pipes makes this system incredibly affordable, and it will save you both time and money in the long run.

11. DIY Water Dripper System

Creating your own water dripper system is a simple and inexpensive way to ensure your plants receive the proper amount of water. To assemble this system, you will need a garden hose, hose connector, drippers, stakes, and a flow control valve and timer. These materials can be found at your local home improvement or hardware store. Follow this tutorial to assemble your own DIY water dripper system and keep your plants healthy and hydrated.

4. DIY Rain Water Irrigation System

DIY Rain Water Irrigation System

Are you tired of using city water to irrigate your lawn or garden? Why not build a DIY rainwater irrigation system? This system allows you to collect rainwater and use it to water your plants, providing them with a natural source of water that doesn’t contain any added chemicals. Plus, using rainwater can help you save money on your water bill.

Building a rainwater irrigation system is easy and can be done using materials found at your local hardware store. Check out the tutorial provided by BlueBarrelSystems for step-by-step instructions on how to build your own system. With this system, you can enjoy a healthier garden and save money at the same time.

2. Simple Bucket Irrigation System

Simple Bucket Irrigation System

If you’re looking for an easy and affordable way to water your plants, a simple bucket irrigation system might be the perfect solution for you. With just a five-gallon bucket and a few lines, you can create your own irrigation system that perfectly waters your plants. Best of all, depending on the supplies you have on hand, you may be able to make this system for free. Here’s how to build it:

  1. Gather your supplies: a five-gallon bucket, a length of tubing or hose, and a drill.
  2. Drill a small hole near the bottom of the bucket.
  3. Thread the tubing or hose through the hole and into the bucket.
  4. Fill the bucket with water and let it flow through the tubing or hose to water your plants.

It’s that easy! This simple bucket irrigation system is a great way to keep your plants hydrated without spending a lot of money or time.

13. Raised Garden Bed Irrigation System

Keeping your raised garden beds hydrated has never been easier with this DIY soaker hose system. Perfect for veggie or flower gardens, this system ensures that plant roots are watered evenly and consistently. Plus, it’s affordable and easy to set up. Here’s what you’ll need:

  • Soaker hose
  • Hose connector
  • Timer
  • Garden stakes

To set up the system, simply connect the soaker hose to the hose connector and attach it to your garden hose. Place the soaker hose in your raised garden bed and secure it with garden stakes. Set the timer to water your plants for a set amount of time each day, and voila! Your plants will be perfectly hydrated without any hassle.

12. DIY Soaker Hose System

DIY Soaker Hose System

If you want to keep your plants healthy and hydrated, a DIY soaker hose system is a great option. This system is easy to make and requires only a few materials, including a hose and small PVC pipe. With a few fittings and a couple of hours of work, you can set up the system and get it running. The soaker hose will deliver water right to the roots of your plants, where they need it. Follow a tutorial, such as the one provided by diynetwork, for step-by-step instructions.

Summary

You can easily create a DIY irrigation system for your garden using a few simple tools and materials. By using drip irrigation, you can save water and ensure that your plants receive the proper amount of moisture. Installing a timer can also automate the watering process, making it more convenient for you. Remember to regularly check and maintain your irrigation system to ensure its effectiveness.

Leave a Comment